More products
Window Wall
The Cascadia Universal Window Wall is based upon the standard Universal Series window and door system, and augmented with additional components to provide a fully-featured, full-facade high-rise glazing system.

Description

The Window Wall is available in double glazed and triple glazed configurations, and boasts overall system R-values for the fixed and operable vision areas of over R-4 double glazed and over R-7 triple glazed.  Spandrel areas will be substantially higher.
 
The product line continues to maintain the Red-List-Free listing achieved by the base Universal Series.
 
Patented, and patents pending.
 
The pre-launch product information published here is for a product that is still in the final stages of development.  All drawings and details are draft concept details.  They are distributed for the sole purpose to invite inquiries to Cascadia from interested project design teams.  Cascadia will respond to inquiries with technical support and keep those parties updated with finalized versions and additional details as they become available.

Please direct inquiries to your Cascadia representative, or by email to: 

Configuration Options

Outswing Windows Casement & awning
Doors

Inswing, Outswing, Sliding

Glazing Options

Double (one Low-E)
Triple (two Low-E)
Premium Triple (three Low-E)

 

Key Performance Data

US CAN
Air infiltration Rating (cfm/ft²) Rating (L/s/m²)
Universal Series (all windows & doors) Far better than A3/Fixed (measured values available) Far better than A3/Fixed (measured values available)
Water penetration psf pa
All Components 15 730
Design wind pressure psf pa
Casement (36" x 60") 60 2880
Awning (84" x 36") 60 2880
Awning (48" x 84") 55 2640
Fixed Glazing (144" x 60") 100 4800
Fixed Glazing (102" x 84") 95 4320
Door - single outswing (60" x 120") preliminary results 40 1920
Door - single inswing (60" x 120") preliminary results 45 2160
Door - sliding (XO), 48"x 96" sliding panel - preliminary results 45 2160
NAFS Designators Tested size (inches) Tested size (mm)
CW-PG100-FW (Fx) 144 x 60 3658 x 1524
CW-PG100-FW (Fx) 60 x 144 1524 x 3658
CW-PG95-FW (Fx) 102 x 84 2591 x 2134
CW-PG95-FW (Fx) 84 x 102 2134 x 2591
CW-PG60-C (Cs) 36 x 60 914 x 1524
CW-PG60-AP (Awn) 84 x 36 2134 x 914
CW-PG55-AP (Awn) 48 x 84 1219 x 2134
Door test results coming soon (see above for preliminary results) - -
  • Thermal Performance

    NFRC certified overall window U-values.
    • Glass
      by
      Cardinal

      IGU Properties

      (NFRC method)

      U-values (Overall, NFRC method)
      Stainless Spacer
      90% Argon
      U-value, center of glass Solar Heat Gain  (SHGC) Visible Trans
      (VT)

      Fixed  glazing

      Casement Awning Door Outswing Door Inswing Door Sliding (Draft values)
      180 (#3) 0.26 0.68 79% 0.26 0.25 0.25 0.23 0.23 0.24
      272 (#2) 0.25 0.41 72% 0.25 0.24 0.24 0.23 0.23 0.24
      270 (#2) 0.25 0.37 70% 0.25 0.24 0.24 0.23 0.22 0.23
      366 (#2) 0.24 0.27 65% 0.24 0.24 0.24 0.22 0.22 0.23
      340 (#2) 0.25 0.18 39% 0.25 0.24 0.24 0.22 0.22 0.23

       

    • Glass
      by
      Cardinal

      IGU Properties

      (NFRC method)

      U-values (Overall, NFRC method)
      Stainless Spacer
      90% Argon
      U-value, center of glass Solar Heat Gain  (SHGC) Visible Trans
      (VT)

      Fixed  glazing

      Casement Awning Door Outswing Door Inswing Door Sliding (Draft values)
      180/180 0.13 0.56 70% 0.15 0.17 0.17 0.15 0.15 0.15
      272/180 0.13 0.37 63% 0.14 0.17 0.17 0.15 0.15 0.15
      270/180 0.13 0.33 62% 0.14 0.17 0.17 0.15 0.15 0.15
      366/180 0.13 0.25 57% 0.14 0.17 0.17 0.15 0.15 0.15
      340/180 0.13 0.16 34% 0.14 0.17 0.17 0.15 0.15 0.15

       

    • Glass
      by
      Cardinal

      IGU Properties

      (NFRC method)

      U-values (Overall, NFRC method)
      Stainless Spacer
      90% Argon
      U-value, center of glass Solar Heat Gain  (SHGC) Visible Trans
      (VT)

      Fixed  glazing

      Fixed interior glazed Casement Awning Door Outswing Door Inswing Door Sliding (Draft values)
      180/180/i89 0.12 0.53 68% 0.13 0.13 0.16 0.16 0.14 0.14 0.14
      272/180/i89 0.11 0.36 62% 0.13 0.13 0.16 0.16 0.14 0.14 0.14
      270/180/i89 0.11 0.32 60% 0.13 0.13 0.16 0.16 0.14 0.14 0.14
      366/180/i89 0.11 0.24 56% 0.13 0.13 0.16 0.16 0.13 0.14 0.13
      340/180/i89 0.11 0.15 33% 0.13 0.13 0.16 0.16 0.14 0.14 0.14

       

    • STC/OITC Test Results

      Click here to see the acoustic performance of various window configurations.

      Window Type

      Glazing

      STC

      OITC

      Sample size

      Fixed Window

      Double 6/4

      34

      28

      47.25 x 59

      Fixed Window

      Triple 6Lami/4/6

      37

      27

      47.25 x 59

      Glass-only Data (calculated values), 1" IGU nominal Double 6/6 35 28 center-of-glass
      Glass-only Data (calculated values), 1.25" IGU nominal Double 6/6 38 31 center-of-glass

       

    • Hardware - Casement and Awning Windows

      Rotary Crank Handle and Multi-Point Locking Latch
      Available colors:
      Brushed Chrome, White, Black
      Hardware manufactured by:
      Roto Frank

      Brushed Chrome shown on white window

      Brushed Chrome shown on slate grey window

      Brushed Chrome shown on black window

      White shown on white window

      White shown on slate grey window

      Black shown on slate grey window

      Black shown on black window

    • Hardware - Inswing Door and Sliding Door

      Rotoline Handles to Operate Concealed Multi-point Locks

      Available colors:
      White, Titanium, Black, Bronze
      Hardware manufactured by:
      Roto Frank

      White Rotoline handle shown on white and slate grey frames

      Titanium color Rotoline handle shown on white, slate grey and black frames

      Black Rotoline handle shown on slate grey and black frames

      Bronze Rotoline hanlde shown on commercial brown frames